Model Number: Edge 5X0
Part Numbers: Edge 520, Edge 540
The SD-WAN Edge 5x0 series includes the following:
Follow the steps below to install the Edge in the standard configuration.
Connect the power adapter to the AC power outlet and connect the other end of the adapter to the power port on the Edge. When the Edge powers ON, verify that the Cloud logo LED located on the front of the Edge will illuminate.
Connect the Edge to an available Internet connection, and then connect the Ethernet cable to either of the ports labeled GE1 or GE2.
Note: The VMware SD-WAN Edge is configured by default to acquire a DHCP IP address from the ISP on the WAN (uplink). When the WAN connection is fully operational, the cloud LED on the front of the Edge is solid green.
If you received an email from your IT administrator, follow the instructions in the email to complete the Edge activation.
Connect local devices such as desktops, phones, and switches to any of the LAN ports, or connect through the Edge’s Wi-Fi.
Wireless radio is limited to maximum EIRP power of 100mW in the following bands (MHz): 2402-2483, 5170-5330, and 500mW in 5470-5725. Per-country power limits will apply when activated.
Hereby, VMware, Inc. declares that the VMware SD-WAN Edge Wireless Gateway is in compliance with the Directive 2014/53/EU. EU Declaration of Conformity